Moxa Technologies CP-168U Network Card User Manual


 
Note! Each board must occupy one unique IRQ and four 8-byte I/O
addresses, which are assigned automatically by the PCI BIOS.
However, you can select a free IRQ number manually via the
PC’s BIOS setup for the PCI slot, but normally this method is not
available for the I/O address. The possible IRQ numbers are 2, 3,
4, 5, 7, 10, 11, 12, and 15. The possible I/O addresses are from
0x0000 to 0xFFFF.
Step 8: Proceed with the software installation, as described in the next chapter,
“Software Installation”.
Smartio CP-168U User’s Manual
2-2