Filter
Top Products
Software Installation
Installing the Driver
The following procedure shows how to install the Smartio CP-168U Series driver for the
first time under Windows 2000 and Windows XP. First make sure the board or boards have
already been plugged into the system’s PCI slot(s).
Windows 2000 Windows XP
1. Windows 2000 can auto-detect new devices,
and activate the Found New Hardware
function to install a device driver for Plug
and Play devices.
2. Click on Next to continue.
3. Select Search for a suitable driver… and
then click on Next to continue.
1. Windows XP can auto-detect new devices,
and activate the Found New Hardware
function to install a device driver for Plug
and Play devices.
2. Select Install from a list or specific
location, checkmark Include this location in
the search, and then click on Browse. You
should locate the Software\Win2K\V1.5
folder on the software CD. Click on Next to
continue.
3. Wait while the driver software is installed.
Smartio CP-168U User’s Manual
3-21