Filter
Top Products
2-2
Housing
DIN Rail
For many industrial applications, you will find it convenient to use the DIN Rail
attachments, as shown below.
STEP 1: Use 2 screws per ear to attach DIN Rail mounts to each of NPort
Express’s two ears.
⇒
STEP 2: Insert the top of the DIN Rail
into slot A of the DIN Rail
mount.
STEP 3: Push the bottom of NPort
Express so that the bottom of
the DIN Rail snaps into slot B
of the DIN Rail mount.
NOTE: The Din Rail mounting kit is an optional accessory.
To remove NPort Express from the DIN Rail, simply reverse Steps 2 and 3 above by
grasping the bottom of the NPort Express unit with both hands, and then using your
fingers to pull down slightly on the DIN Rail mounts at slot B. This releases the
bottom of the DIN Rail from the DIN Rail mount.