Moxa Technologies NPort 1220 Switch User Manual


 
Installing the Driver
1. Connect NPort 1220/1240’s USB Port to your computer’s USB port. Make sure NPort 1220/1240
and your computer is properly connected.
2. After you connect NPort 1220/1240 to your computer, a Found New Hardware window will
automatically open.
3. When the Found New Hardware Wizard starts up, click Next to continue installing the USB
driver.
4. The setup program will prompt you with an Install Hardaware Device Drivers window. Select
Search for a suitable driver for my device (recommended), and then click Next.
NPort 1220/1240 USB-to-Serial Hub User’s Manual
2-2