Filter
Top Products
3-10
MS-9821 Mainboard
Super IO Configuration
Serial Port 1 / 2 Address
Select an address and a corresponding interrupt for the serial port 1/2.
Serial Port2 Mode
This setting allows you to specify the operation mode for the serial port 2.
Parallel Port Address
This setting specifies the I/O port address and IRQ of the onboard parallel port.
Parallel Port Mode
This setting allows you to specify the operation mode for the parallel port.
Parallel Port IRQ
Select a corresponding interrupt for the parallel port.
Serial Port 3 / 4 Address
Select an address for the serial port 3/4.
Serial Port 3 / 4 IRQ
Select a corresponding interrupt for the serial port 3/4.
Chassis Intrusion
The field enables or disables the feature of recording the chassis intrusion
status and issuing a warning message if the chassis is once opened. To clear
the warning message, set the field to [Reset]. The setting of the field will
automatically return to [Enabled] later.