Filter
Top Products
fax-type equipment is used on The Stick, simply deactivate this feature.
Factory preset is “on”.
Protected Hook
Flash-This feature allows The Stick to be compatible
with certain multi-line
KSU
phone systems. Some KSU systems do not
allow touch tones (DTMF tones) to be generated from a telephone key
pad after an inbound call has arrived. With Protected Hook flash "on"
the phone system can be “fooled” into generating touch tones by striking
the flash key. Calls can then be manually transferred between devices by
dialing the proper security access code. Factory preset is “off.”
Unanswered Call Silent Transfer-This feature was engineered for
those of you who may receive manual fax or modem calls after normal
business hours but do not use an answering machine. Manual fax calls
(not accompanied by CNG fax tones) and modem calls usually wind up
routed to the phone when the caller cannot execute the proper access
code. With Unanswered Call Silent Transfer “on”, the inbound call
(routed to the phone) will be switched over to a designated port (see
Silent Transfer Destination) after the unanswered phone has been rung
the maximum number of rings. Factory preset is “off.”
Answering Machine Silent Transfer-This
feature works like
Unanswered Call Silent Transfer except tha t
it is designed for calls of
45
seconds or less. It should only be activated when you are using an
answering machine to field after-hours calls. When a manual fax or
modem call arrives and the answering machine has answered, the caller
will still be able to get to a destination device by staying on the line after
the answering machine “times out”. If you answer a call and hang up
before 45 seconds, The Stick will transfer the call to the designated
device. Factory preset is “off.”
Silent Transfer Destination-After activating either Silent Transfer
feature, you will want to tell The Stick where to route the call. The
“Destination” program feature gives you the option of routing all
after-
hours calls to either the fax or modem. Factory preset is to the port
labeled “FAX”.
Programmable e
Securityv
Access Codes (SAC’s)-Transfer of a call is
executed by dialing the programmed SAC for each voice/data device
2