Filter
Top Products
Chapter 5 – Configuration Using Web Management Software
Multi-Tech Systems, Inc. RouteFinder SOHO RF820/RF820-AP & RF830/RF830-AP User Guide (S000399E) 31
Administration > SNTP Client
Administration > SNTP Client
SNTP (Simple Network Time Protocol) is an internet protocol used to synchronize the clocks of computers on
the network. Clicking the SNTP Client check box enables the firewall to act as a SNTP client.
SNTP Configuration
General Configuration
SNTP Client
Enable or disable the SNTP Client to contact the configured server on the UDP port 123 and set the
local time. Default is Disable.
Server
Enter the SNTP server name or IP address to which the SNTP Client must contact in order to update
the time. No default.
Polling Time
Enter the polling time at which the SNTP client requests the server to update the time. Default is 300
minutes. Time must be entered in minutes.