Filter
Top Products
Chapter 3 – Remote Configuration
MT5634ZLX, MT5634ZLXI, MT5634ZLX/FE User Guide 14
Changing the Remote Escape Character
To further improve security, you can change a remote modem’s remote configuration escape character.
The remote configuration escape character is stored in register S9. The factory default is 37, which is the
ASCII code for the percent character (%). Setting S9 to 0 (zero) disables remote configuration entirely.
Caution: If you do this remotely, you won’t be able to change it back remotely!
1. Establish a remote configuration link with the remote modem as described in Basic Procedure.
2. Note: This command can be executed locally as well as remotely.
3.
Type ATS9=n, where n is the ASCII code for the new remote configuration escape character, then
press
Enter.
4.
Save the new value by typing AT&W and pressing Enter.
5. Type ATO and press Enter to exit remote configuration.