Filter
Top Products
Chapter 2 – Installation
MT5634ZLX, MT5634ZLXI, MT5634ZLX/FE User Guide 9
Installing the MT5634ZLX/FE Card
Installing the MT5634ZLX/FE CardInstalling the MT5634ZLX/FE Card
Installing the MT5634ZLX/FE Card
1. Insert the MT5634ZLX/FE Card into the computer’s PCMCIA slot. Be sure the label is facing up.
2. Plug the Modem-LAM (Line Adapter Module) into the modem port of the PC Card.
3. Plug one end of the RJ-11 telephone line cord into the open end of the Modem-LAM (this is the
LAM’s RJ-11 receptacle side).
4. Plug the other end of the RJ-11 into an available telephone wall jack. This connects you to the PSTN
(Public Switched Telephone Network).
5. Plug the Ethernet-LAM into the Ethernet port of the PC Card.
6. Plug one end of either a UTP or an STP cable into the Ethernet-LAM.
7. Plug the other end of the UTP/STP cable into the Ethernet LAN.
8. Installation of the driver for the MT5634ZLE/FE: When prompted for drivers, choose the Advanced
path and browse to the
Drivers_FE folder and then to the appropriate subfolder for your Windows
version.
9. With your PC turned on, verify the operation of the LEDs.
Modem LAM LEDs
OH (Off-Hook) light on means the MT5634ZLXI is dialing, is online, or answering a call.
CD (Carrier Detect) light on means a valid carrier signal from another modem is detected.
RD (Receive Data) light flashes when data is being received.
TD (Transmit Data) light flashes when data is being transmitted.
Ethernet LAM LEDs
ACT light on means there’s activity on the line.
10/100 light on means 100m; 10/100 light off means 10m.
Link light on means the line is active.
MT5634ZLX/FE Connections