Multi-Tech Systems MT5634ZPX-PCI-U-NV Network Card User Manual


 
3 Remote Configuration
16
MultiModemZPX User Guide
To Change the Remote Escape Character
To further improve security, you can change a remote modems remote configuration escape character ei-
ther locally or remotely. The remote configuration escape character is stored in register S9. The factory
default is 37, which is the ASCII code for the percent character (%). Setting S9 to 0 (zero) disables remote
configuration entirely.
CAUTION: If you do this remotely, you wont be able to change it back remotely.
1. Establish a remote configuration link with the remote modem as described in Basic Procedure.
2. Type ATS9=n, where n is the ASCII code for the new remote configuration escape character, and
then press E
NTER.
3. Save the new value by typing AT&W and pressing E
NTER.
4. Type ATO and press ENTER to exit remote configuration.