Filter
Top Products
Chapter 2 – Activation and Installation
Connecting Phone Handset (Optional)
If you intend to use a phone handset, connect it to the MultiModem now.
Attaching the Modem to a Flat Surface (Optional)
To mount the wireless MultiModem:
1. Obtain mounting screws (two are needed) that are appropriate for the surface on which you will
mount the MultiModem. For example, one might use two 6-32 self-tapping screws 5/8” in length to
mount the unit in a truck to the wall of the cab behind the passenger’s seat.
2. Typically, the unit is mounted against a flat surface into which holes can be drilled. The mounting
holes (center-to-center) must be separated by 125 mm or 4 -15/16 inches.
3.
Drill the mounting holes at the desired mounting location (if applicable).
4. Slide the mounting brackets into the corresponding slots on the back of the MultiModem chassis.
5. Attach the MultiModem with two screws to the mounting surface at the desired location on the
equipment.
12 Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide