Filter
Top Products
4-4 Using the InfoMonitor
OB setting
This should be set whenever the IP address is changed or the monitoring interval is
adjusted.
1
Click “OB settings” in the “Environment settings”, then click [Search].
2
Select the IP address of your machine and click [OK].
3
Enter the Monitor Interval.
This will set how often InfoMonitor checks for new documents.
NOTE: You can set the interval from 1 to 999 minutes.
4
Click [OK].
• Click [Apply] to save the setting and keep the screen active.
• Click [Close] to close the screen without saving the changes.