Filter
Top Products
TP6000 USER’S MANUAL 4 - 5
MAGNETIC STRIPE READER
The magnetic stripe reader, if installed, will be mounted on the right edge of
the TP6000 series. When reading an ISO standard magnetic card, please face the
magnetic stripe toward the TP6000 series and slide the card downward through the
slot.
CASH DRAWER(S)
The cash drawer control port, if connected to a Posiflex cash drawer, not only
provides a way to open the cash drawer through software commands, but also
provides a detection method for the software to check the drawer open status for
consequent security measures.
The TP6000 series provides one cash drawer connector with the ability to
control two cash drawers. When using the standard CCBLA-180 (or CCBLA-180-1)
cash drawer cable, the TP6000 has the ability to control one cash drawer. When the
optional CCBLA-238 cable is connected to the CR1 port, this gives the TP6000 the
ability to control two cash drawers independently. Note: Both cables, CCBLA-180
(or CCBLA-180-1) and CCBLA-238 are designed for use with Cash Drawer models
CR3100 or CR3200 or CR4000 or CR4100 only.
DISPLAY RESOLUTION
For best viewing results, please set the TP6X12 display resolution at 800 x 600
with true color in the operating system. For the TP6X15, please set the display
resolution at 1024 x 768 with high color. Of course, other resolution as set through the
Windows can still obtain a full size display.
SOUND PORT
The optional audio port supports stereo line out. Therefore please connect to a
booster speaker if used.