Filter
Top Products
2. CABLE CONNECTION
15
6
Turn on the monitor's Power switch and then turn on the PC's power.
The monitor's power indicator will light up (blue).
If an image does not appear, refer to the "
7. TROUBLESHOOTING" for advice.
Whenever finished, turn off the PC and the monitor.
Tips
•
When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or Digital) is
displayed for a few seconds on the right top corner of the screen.
•
Adjust brightness of the screen depending on the brightness of your environment. Too dark or
toobright of a screen can cause eyestrain.
•
Be sure to take adequate rests. A 10-minute rest period each hour is suggested.
7
When using the software, ColorNavigator CE, connect the upstream port of the
monitor to the downstream port of the USB compliant PC or another hub with
the USB cable.
After connecting the USB cable, the USB function can be set up automatically. For further details
about the"ColorNavigator CE", refer to the readme.txt in the CD-ROM.
USB Cable