Filter
Top Products
English
24 4. ADJUSTMENT
4. Adjust the output signal range (Dynamic Range) of the signal.
→ Use the <Range Adjustment> (p.45) of <ColorManagerment>
menu.
This controls the level of output signal range to display the whole color gradation
(256 colors).
[Procedure 1]
Push the Auto adjustment button on the front panel while displaying the <Range
Adjustment> menu to automatically adjust the range. The screen blanks for a
moment, and adjusts the color range to display the whole color gradation of the
current output signal.
[Procedure 2]
Pressing Auto adjustment button while displaying the contrast/brightness
adjustment screen (appeared by pressing the control buttons directly) adjusts the
range automatically. (Contrast and Brightness will not be adjusted.)
5. Set the Contrast of the screen.
→ Use the <Contrast> adjustment.
This controls the brightness for the each color (red, blue and green) at the same
time.
Select <Contrast/Brightness> and adjust by using the right and left buttons.
NOTE
• Percentage except 100 % may cause undisplayable color tone.
• During selecting the <sRGB> of <ColorManagement>, contrast cannot be
adjusted.
6. Set the Brightness of the screen.
→ Use the <Brightness> adjustment.
The brightness of the entire screen is controlled by changing the brightness of the
backlight.
Select <Contrast/Brightness> in the screen menu and adjust by using the up and
down buttons.
NOTE
• Directly pressing the control buttons also adjusts the contrast and brightness.
Press the <Enter> button to save and exit the settings after the adjustment.