Filter
Top Products
5. TROUBLESHOOTING 23
ENGLISH
Problems Points to check with possible solutions
3. The image vibrates on
the screen.
Check that the signal cable is properly connected to the
PC or graphics board.
The monitor may be located close to a device that is
generating a magnetic field. Such devices include
speakers (other than the EIZO optional i·Sound
speaker), electric motors, high-voltage cables, and
other monitors. It may be solved by turning off or
moving the interfering device, or by relocating the
monitor.
Use of the “Moiré” adjustment may cause a slight
vibration. To eliminate the vibration, set the
adjustment level to lower percentage or 0%. (p.15)
If the volume level of the EIZO optional i·Sound
speaker is too high, it may, in some cases, cause a
slight vibration. To eliminate, turn down the volume
of the speaker.
Flicker will occur with interlaced scanning, or non-
interlaced scanning with a low refresh rate. All EIZO
monitors are capable of reproducing high refresh rates
for non-interlaced scanning. If a problem occurs when
using a non-interlaced signal, try adjusting the graphics
board to increase the refresh rate (if possible). Refer to
the graphics board manual for information.
Reduce the moiré using the “Moiré” function in the
ScreenManager “Screen” menu. (p.15)
Change the horizontal and vertical size of the display
area.
Change the selected desktop or wallpaper pattern to
any solid color pattern. For detailed information on
how to change these patterns, refer to the PC and
operating system manual.
Change the mode of “Signal Filter” function in the
ScreenManager “Screen” menu. (p.16)
Change the refresh rate. Refer to the PC and graphics
board manual for information.
4. The image is flickering.
5. Moiré patterns appear.
6. The characters and
images have a slight
shadow on their right
side.