Filter
Top Products
26
Chapter5PowerSavingFunctions
5-3. Setting the power saving mode when a person
leaves the monitor <Presence Sensor>
The sensor on the front side of the monitor detects the movement of a person by setting a value from “Level-1”
to “Level-4” of the Presence Sensor function. When a person moves away from the monitor, it shifts to the
power saving mode automatically and does not display the images on the screen to reduce the power
consumption. When a person comes near the monitor again, it comes back from the power saving mode and
displays the images. The detection level of the Presence Sensor can be changed according to the environment of
usage.
Note
• At the time of shifting to Power Saving mode, the message that indicates shifting is displayed.
Attention
• This function cannot be used during portrait style installation or <RadiCS SelfQC> execution.
Procedure
1. Choose <PowerManager> from the Adjustment menu, and press
.
2. Choose <Presence Sensor> from <PowerManager>, and press
.
3. Select “Off” and any of “Level-1”, “Level-2”, “Level-3”, or “Level-4” (sensor detection level) with
or .
4. Press
to exit.
Level Detection Area Details
Level-1 90cm(35.4inch)orless Iftheuserleavesthedetectionarea,themonitorshiftstothe
powersavingmode.Stillobjectsinthedetectionareawillbe
interpretedaspresentuser.Thissettingisrecommendedif
themonitorfrequentlyshiftstothepowersaving,eventhough
auserisinfrontofthescreen.
Level-2 70cm(27.6inch)orless
Level-3 Automaticsetting(90cm[35.4
inch]orless)
Thedetectionareaisdenedautomaticallybytheuser’s
movement.Iftheuserleavesthisarea,themonitorshiftsto
thepowersavingmode.Stillobjectsinthedetectionareawill
beignored.
Level-4 Automaticsetting(70cm[27.6
inch]orless)