Filter
Top Products
7
Chapter1Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
• 29.8 inches
• Applicable to the resolution of 4M pixels (2560 × 1600 dots)
• Uses high-contrast panel (1100:1).
Enables the display of sharp images.
• Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)
• The Hybrid Gamma function automatically identies the display area for the monochrome and color
images on the same screen, and displays each set status.
*
Theidenticationmayfaildependingonthedisplayedimage.Thesoftwaretobeusedneedstobe
veried.
• The RadiCS SelfQC function and the built-in Integrated Front Sensor allow the user to perform the
calibration and Grayscale Check for the monitor independently.
See “Chapter 4 Controlling Monitor Quality” (page 23)
• The quality control software “RadiCS LE (for Windows) used to calibrate the monitor and to manage the
history is included
See “1-2. EIZO LCD Utility Disk” (page 8)
• The software “ScreenManager Pro for Medical” to adjust the screen using the mouse and keyboard is
included
See “1-2. EIZO LCD Utility Disk” (page 8)
• CAL Switch function for selecting an optimal calibration mode
See “To select the display mode (CAL Switch mode)” (page 12).
• Selectable DICOM (page 39) Part 14 complied screen.
• Frame Synchronous mode supported (29.5 to 30.5 Hz, 59 to 61 Hz)
• Power saving function
This product is equipped with power saving function.
- Power Consumption when main power switch is Off: 0 W
Equipped with main power switch.
Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not used.
- Presence Sensor
The sensor on the front side of the monitor detects the movement of a person. When a person moves away from the
monitor, it shifts to the power saving mode automatically and does not display the images on the screen. Therefore,
the function reduces the power consumption.
See “5-3. Setting the power saving mode when a person leaves the monitor <Presence Sensor>” (page 26).
• Built-in illuminance sensor
• HDCP (High-bandwidth Digital Content Interface)
• Panel protector is included (for RX430-FC only).
Attention
• Storing or using the monitor at a temperature of under 30°C and a humidity of under 70% is recommended, or it may
affect the measurement accuracy of the built-in sensor. Avoid storing or using the sensor where it may be exposed to
direct sunlight.