Filter
Top Products
7
Chapter 1 Overview and Features
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1 Features
• 21"(S2111W)/24"(S2411W) wide format LCD
• Applicable to HDCP
• Equipped with the ContrastEnhancer and OutlineEnhancer functions
• Dual-input compliant (DVI-I x 2 connectors)
• DVI digital input (TMDS) compliant
• Horizontal scan frequency, Vertical scan frequency and Resolution are as follows;
Horizontal scan
frequency
Analog S2111W 24 - 82 kHz
S2411W 24 - 94 kHz
Digital S2111W 31 - 65 kHz
S2411W 31 - 76 kHz
Vertical scan
frequency
Analog S2111W 49 - 86 Hz 49 - 61 Hz (1680 × 1050)
49 - 76 Hz (1280 × 1024)
S2411W 49 - 86 Hz 49 - 61 Hz (1920 × 1200)
49 - 76 Hz (1600 × 1200)
Digital S2111W 59 - 61 Hz (VGA TEXT: 69 - 71 Hz)
S2411W 59 - 61 Hz (VGA TEXT: 69 - 71 Hz)
49 - 51 Hz (1080p@50 Hz)
Resolution S2111W 1680 dots × 1050 lines
S2411W 1920 dots × 1200 lines
• Compatible with frame synchronization mode
59 - 61 Hz, 49 - 51 Hz : 1080p@50 Hz (S2411W, digital)
• Smoothing (soft - sharp) function for adjustment of enlarged images
• FineContrast mode to allow the best mode for screen display
• The utility software “ScreenManager Pro for LCD” (for Windows) to control
the monitor from a PC with mouse/keyboard is included (refer to the EIZO
LCD Utility Disk).
•
The ArcSwing 2 Stand enables to adjust the monitor height and monitor angle freely
1-2 Switches and Indicators
Switch
Adjustment menu (*ScreenManager
®
)
1. Input signal selection switch
2. Auto adjustment switch
3. Enter switch
4. Control switches (Left, Down, Up, Right)
5. Power switch
6. Power indicator
Indicator status Operation status
Blue The screen is displayed
Orange Power saving
Off Power off
* ScreenManager
®
is an EIZO’s nickname of the Adjustment menu.
NOTE
• While the screen is displayed, the
blue power indicator that is lighting
blue can be turned off (see “Power
Indicator/Logo Display Setting,” on
page 20).
• For the power indicator status with
“Off Timer” set, refer to “To set
monitor power-off time” on page 17.
NOTE
• The stand of the unit can be replaced
with an arm or another stand. (Refer
to “5-1 Attaching an Arm” on page
28.)
S2111W_UM_EN_v1.3.indd Sec3:7S2111W_UM_EN_v1.3.indd Sec3:7 10/23/2006 3:43:36 PM10/23/2006 3:43:36 PM