Filter
Top Products
4.1 Standard Protocol 4.1 Standard Protocol
The standard protocol supports all adjustments and control of the monitor. This protocol uses two
kinds of data packet types. Packet format called “Operation” is used for adjustments such as
brightness, contrast and backlight brightness. The packet type called “key simulation” is used to
operate the OSD via serial interface.
The standard protocol supports all adjustments and control of the monitor. This protocol uses two
kinds of data packet types. Packet format called “Operation” is used for adjustments such as
brightness, contrast and backlight brightness. The packet type called “key simulation” is used to
operate the OSD via serial interface.
Interface ParametersInterface Parameters
Baud-Rate
19200
Parity None
Data-Bits 8
Stop Bits 1
Handshake No
Protocol
Host
Monitor
Operation / Key
ACK(OK)
Operation(GET)
ACK(OK)
OpPack
0x1E
ACK-Message
OK
0x06
Error
0x15
44 4 Serial Communication erial Communication