Filter
Top Products
-10688
noTrigEnabledErr
The number of total scans and
pretrigger scans implies that a
triggered start is intended, but
triggering is not enabled.
-10689
digitalTrigBErr
Digital trigger B is illegal for the
number of total scans and pretrigger
scans specified.
-10690
digitalTrigAandBErr
This device does not allow digital
triggers A and B to be enabled at the
same time.
-10691
extConvRestrictionErr
This device does not allow an external
sample clock with an external scan
clock, start trigger, or stop trigger.
-10692
chanClockDisabledErr
The acquisition cannot be started
because the channel clock is disabled.
-10693
extScanClockErr
You cannot use an external scan clock
when performing a single scan of a
single channel.
-10694
unsafeSamplingFreqErr
The sample frequency exceeds the safe
maximum rate for the hardware, gains,
and filters used.
-10695
DMAnotAllowedErr
You have set up an operation that
requires the use of interrupts. DMA is
not allowed.
-10696
multiRateModeErr
Multi-rate scanning cannot be used
with the AMUX-64, SCXI, or
pretriggered acquisitions.
-10697
rateNotSupportedErr
Unable to convert your
timebase/interval pair to match the
actual hardware capabilities of this
device.
-10698
timebaseConflictErr
You cannot use this combination of
scan and sample clock timebases for
this device.
-10699
polarityConflictErr
You cannot use this combination of
scan and sample clock source
polarities for this operation and device.
-10700
signalConflictErr
You cannot use this combination of
scan and convert clock signal sources
for this operation and device.