Filter
Top Products
© 1998–2003 National Instruments Corp. All rights reserved.
LabVIEW™, National Instruments™, NI™, ni.com™, NI-DAQ™, and SCXI™ are trademarks of National Instruments
Corporation. Product and company names mentioned herein are trademarks or trade names of their respective
companies. For patents covering National Instruments products, refer to the appropriate location: Help»Patents in your
software, the patents.txt file on your CD, or ni.com/patents.
January 2003
321924C-01
SCXI -1321 OFFSET-NULL AND
SHUNT-CALIBRATION HIGH-VOLTAGE
TERMINAL BLOCK INSTALLATION GUIDE
This guide describes how to install and use the SCXI-1321 offset-null
and
shunt-calibration terminal block with the SCXI-1121 module. You can
only use the SCXI-1321 terminal block with SCXI-1121 revision
C or later
modules. In addition to the 18 screw terminals, the SCXI-1321 has circuitry
for offset-null adjustment of Wheatstone bridges, and a socketed shunt
resistor for strain-gauge shunt calibration. This terminal block was
primarily designed for Wheatstone bridge transducers such as strain
gauges, although it can easily accommodate thermocouples, RTDs,
thermistors, millivolt sources, volt sources, and current-loop receivers.
Thermocouples have cold-junction compensation (CJC) support.
Conventions
The following conventions are used in this guide:
» The » symbol leads you through nested menu items and dialog box options
to a final action. The sequence File»Page Setup»Options directs you to
pull down the File menu, select the Page
Setup item, and select Options
from the last dialog box.
This icon denotes a note, which alerts you to important information.
This icon denotes a caution, which advises you of precautions to take to
avoid injury, data loss, or a system crash. When this symbol is marked on
the product, refer to the Read Me First: Safety and Radio-Frequency
Interference document, shipped with the product, for precautions to take.
bold Bold text denotes items that you must select or click in the software, such
as menu items and dialog box options. Bold text also denotes parameter
names.
™
ni.com