Filter
Top Products
NI WAP-3701/3711 User’s Manual Web Console Configuration
3-22
TCP/UDP Port Filters
The destination port field of the TCP or UDP header of a packet incoming from the WLAN or
Ethernet interface is inspected for filtering. As a rule, specify the decimal Destination Port,
Protocol type (TCP/UDP), and the name of the higher-level protocol (Application Name).
Management
UPnP
UPnP (Universal Plug and Play) enables a Windows XP user to discover peripheral devices
automatically by HTTP. When the UPnP functionality is enabled, you can see the AP in My
Network Places of Windows XP. The NI WAP-3701/3711 can be given a friend name that will be
shown in My Network Places. Double-clicking the icon in My Network Places that stands for the
AP will launch the default Web browser for you to configure the NI WAP-3701/3711.
System Log
System events can be logged to the on-board RAM of the NI WAP-3701/3711 (Local log) or sent
to a remote computer on which an SNMP trap monitor program runs (Remote log by SNMP trap).
See the next subsection for more information about SNMP trap settings.
The system events are divided into the following categories:
y
General: system and network connectivity status changes.
y
Built-in AP: wireless client association and WEP authentication status changes.
y
MIB II traps: Cold Start, Warm Start, Link Up, Link Down and SNMP Authentication Failure.
y
RADIUS user authentication: RADIUS user authentication status changes.