Filter
Top Products
NI WAP-3701/3711 User’s Manual Getting Started
2-4
Step 6: Configure the NI WAP-3701/3711’s IEEE 802.11 settings
Go to the IEEE 802.11 Communication section to configure IEEE 802.11g-related communication
settings, including Regulatory domain, Channel number, and Network name (SSID).
The number of available RF channels depends on local regulations; therefore, you will need to
choose an appropriate regulatory domain to comply with local regulations. The SSID of a wireless
client computer and the SSID of the NI WAP-3701/3711 must be identical for them to be able to
communicate with each other.
When you are finished, click on Save at the bottom of the page. This will return you to the home
page.
Step 7: Review and Apply Settings
On the home page, you can review all of the settings you have made. Changes are highlighted in
red. If the changes are okay, click on Restart to restart the NI WAP-3701/3711 for the new
settings to take effect.
NOTE
About 10 seconds are needed for the AP to complete its restart process.