Filter
Top Products
InstantWave High Rate 11Mbps Access Point 23
Figure 17. Upgrade AP Firmware
Use the Browse button to choose the file to be uploaded to the AP, or type the file
location and name in the File Name field. The Upload button will then become
enabled. Click Upload. The new firmware will be loaded into the AP’s flash
memory area. When the file transfer is complete, click OK to begin the AP’s
internal firmware updating process.
Reset AP Configuration
Click Reset AP Configuration to open the screen shown in Figure 18, and click
Reset to restore the factory default configuration to the Access Point.
Figure 18. Reset the AP Configuration
Manage APMS Host Table
Click the Manage APMS Host Table button to open the APMS Table dialog box
(Figure 19).