Filter
Top Products
34 InstantWave
11-Mbps Wireless Access Point
Use the Browse button to choose the file to be uploaded to the AP, or type the file
location and name in the File Name field. The Upload button will then become
enabled. Click Upload. The new firmware will be loaded into the AP’s flash
memory area. When the file transfer is complete, click OK to begin the AP’s internal
firmware updating process.
Reset AP Configuration
Click Reset AP Configuration to open the dialog box shown in Figure 18, and click
Reset to restore the factory default configuration to the access point.
Figure 18. Reset the AP Configuration
InstantWave Product Placement Guidelines
A few tips to mention that are particularly significant in a radio wave
communications system:
1. Radio waves reflect or refract from buildings, walls, metal furniture, or other
objects. This could result in performance degradation due to the fluctuation of
the received signal.
2. Microwave ovens use the 2.45-GHz frequency band. InstantWave also
functions in the 2.4 to 2.5-GHz band, and therefore shares some of the band with
microwave ovens. This means that when a nearby microwave oven is in use, it
may interfere with InstantWave signals, resulting in performance degradation
on the wireless network.