NEC 42VP4 Computer Monitor User Manual


 
24
Setting the BNC connectors
Select whether to set the input of the 5 BNC connectors to
RGB and component.
Example: Set the BNC INPUT mode to COMP.
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select OPTION1, then
press the MENU/ENTER button.
The OPTION1 screen appears.
2. Use the and buttons to select BNC INPUT.
3. To set the BNC INPUT mode to COMP....
Use the
and
buttons to select COMP..
The mode switches as follows each time the
or
button is pressed:
RGB COMP.
OPTION1
1 / 3
EXIT
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
: COMP.
: RGB
: AUTO
: 1080B
: OFF
: OFF
SEL.
RETURN
ADJ.
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
BNC INPUT Settings
RGB .........Use the 5BNC terminals for RGB input.
COMP. ......Use the 3BNC terminals for component
input.
Restoring the factory default settings
Select ALL RESET under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
Checking the signal being transmitted to
RGB1 terminal
Use this to confirm the signal being transmitted to the
RGB1 terminal.
It is set to RGB and can not be adjusted.
OPTION1
1 / 3
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
CAN NOT ADJUST
: RGB
: RGB
: AUTO
: 1080B
: OFF
: OFF
Setting a computer image to the correct RGB
select screen
With the computer image, select the RGB Select mode
for a moving image such as (video) mode, wide mode or
digital broadcast.
Example: Setting the RGB SELECT mode to
MOTION
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the and buttons to select OPTION1, then
press the MENU/ENTER button.
The OPTION1 screen appears.
2. Use the and buttons to select RGB SELECT.
3. To set the RGB select mode to MOTION ...
Use the
and
buttons to select MOTION.
The mode switches as follows each time the
or
button is pressed:
AUTO STILL MOTION WIDE1 WIDE2 DTV
OPTION1
1 / 3
EXIT
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
NEXT PAGE
: RGB
: RGB
: MOTION
: 1080B
: OFF
: OFF
SEL.
RETURN
ADJ.
4. Once the setting is completed ...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
V
OPTION1
EXIT
OSM
BNC INPUT
D-SUB INPUT
RGB SELECT
HD SELECT
INPUT SKIP
ALL RESET
: RGB
: RGB
: AUTO
: 1080B
: OFF
: OFF
1024؂768
SEL.
RETURN
MENU/ENTER
OK
Only effective when Advanced OSM is OFF.
OSM ORBITER settings
ON ........ The position of the menu will be shifted by
eight dots each time OSM is displayed.
OFF ...... OSM will be displayed at the same position.
Restoring the factory default settings
Select ALL RESET under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults except for Auto Picture.