Filter
Top Products
4-30
Installing the Printer Driver
Under Windows NT4.0
Printer Driver
Chapter 4
Important!
10. In
Name or address of host providing lpd
, type in the printer
IP address that was assigned when the network interface card was
installed. In
Name of printer on that machine
, type in
PORT1
.
• You will not be able to select
LPR Port
unless the following two settings
are in effect in the
Control Panel
Network
applet.
• Protocol: TCP/IP Protocol
• Services: TCP/IP Print
• If you have a problem selecting
LPR Port
, change these settings as
shown above.
PageWorks.book Page 30 Tuesday, April 21, 1998 3:55 PM