Filter
Top Products
9
Monitor AccuSync
™
120 Notes
Specifications Monitor
Picture Tube Diagonal: 21.0 inch 90° deflection, 0.25 mm trio dot pitch,
Viewable Image Size: 20.0 inch medium short persistence phosphor,
Radius: 1730 mm multi-layered, anti-static screen coating,
semi-tint screen, Invar Shadow Mask and
OptiClear
®
screen surface.
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync Positive/Negative
Sync on Green:
Display Colors Analog input: Unlimited number of Colors Depends on display card used.
Synchronization Horizontal: 30 kHz to 96 kHz Automatically
Range Vertical: 55 Hz to 160 Hz Automatically
Resolutions Supported 640 x 480 @ 70 to 160 Hz
Some systems may not support
Resolution based on
horizontal and
720 x 400 @ 55 to 160 Hz
all modes listed.
vertical frequencies only
800 x 600 @ 55 to 152 Hz
1024 x 768 @ 55 to 120 Hz
1152 x 870 @ 55 to 105 Hz
1280 x 1024 @ 55 to 89 Hz .....................
NEC cites recommended resolution at
1600 x 1200 @ 55 to 76 Hz
85 Hz for optimal display performance
Active Display Area Horizontal:
390 mm/15.4 inches Dependent upon signal timing used,
(Factory Setting) Vertical:
293 mm/11.5 inches and does not
include border area.
Active Display Area
406 mm/16.0 inches Dependent upon signal timing used,
(Full Scan)
305 mm/12.0 inches and does not
include border area.
Power Supply
AC 100 - 240 V, 50/60 Hz
Current Rating 2.0A @ 100 - 240V
Dimensions
498 mm (W) x 510 mm (H) x 512 mm (D)
19.6 inches (W) x 20.1 inches (H) x 20.2 inches (D)
Weight 28kg
61.7 lbs
Environmental Considerations
Operating Temperature: 0°C to +40°C
Humidity: 10% to 90%
Feet: 0 to 10,000 Feet
Storage Temperature: -20°C to +60°C
Humidity: 0% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
Specifications
AS120Manual.wpc 9/13/01, 3:08 PM11