Filter
Top Products
E-17
AUDIO IN
LR
AUDIO OUT
L R
VIDEO OUT
S-VIDEO VIDEO
PC CONTROL
COMPONENT IN
COMPUTER IN
AUDIO IN
Cr/Pr
Cb/Pb
Y
AC IN
VIDEO IN
S-VIDEO IN
R
L/mono
AUDIO IN
S-VIDEO IN
AUDIO IN
VIDEO IN
Connecting Your VCR or Laser Disc Player
Audio equipment
Audio cable
(supplied)
Use S-Video or RCA cables (provided) to connect your VCR, laser disc player or document camera to your
projector.
To make these connections, simply:
1. Turn off the power to the projector and VCR, laser disc player or document camera.
2. Connect one end of your RCA or S-Video cable to the video output connector on the back of your VCR or laser
disc player, connect the other end to the Video input on your projector. Use an audio cable (supplied) to
connect the audio from your VCR or laser disc player to your audio equipment (if your VCR or laser disc player
has this capability). Be careful to keep your right and left channel connections correct for stereo sound.
3. Turn on the projector and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video output
requirements.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind
via a scan converter.
S-Video cable (supplied)
Composite video cable (supplied)
VCR/ Laser disc player
2. INSTALLATION AND CONNECTIONS