NEC LCD194WXM Computer Monitor User Manual


 
9
OSD Warning: OSD Warning menus disappear with SELECT button.
NO SIGNAL: This function gives a warning when there is no signal present.
After power is turned on or when there is a change of input signal or video
is inactive, the
No Signal window will appear.
OUT OF RANGE: This function gives a recommendation of the optimized
resolution and refresh rate. After the power is turned on or there is a change
of input signal or the video signal doesn’t have proper timing, the
Out Of
Range
menu will appear.
EXIT
Selecting EXIT allows you exit OSD menu/sub menu.
LANGUAGE
OSD control menus are available in seven languages.
OSD TURN OFF
The OSD control menu will stay on as long as it is in use. In the
OSD Turn OFF submenu, you can select how long the monitor waits
after the last touch of a button to shut off the OSD control menu. The
preset choices are 10 - 120 seconds in 5 second intervals.
OSD LOCK OUT
This control completely locks out access to all OSD control functions
without Brightness, Contrast and Volume. When attempting to
activate OSD controls while in the Lock Out mode, a screen will
appear indicating the OSD are locked out. To activate the OSD Lock
Out function, press “1<->2 / RESET“, then “+“ key and hold down
simultaneously. To deactivate the OSD Lock Out, press “1<->2 /
RESET“, then “+“ key and hold down simultaneously.
EXPANSION
Selects the zoom mode.
FULL: The image is expanded to 1440 x 900 (LCD174WXM/
LCD194WXM), or 1680 x 1050 (LCD224WXM) regardless of
resolution.
ASPECT: The image is expanded without changing the aspect ratio.
DDC/CI
Turns on or off the two-way communication and control of the monitor.
With DDC/CI turned on, some monitor settings can be adjusted through the
graphics card using a computer.
MONITOR INFO
Indicates the model and serial numbers of your monitor.
Controls - continued