NEC LT280 Projector User Manual


 
16
AUDIO
IN
PC CARD
COMPONENT IN
USB LAN
AUDIO IN
COMPUTER 3 IN
COMPUTER 1 IN COMPUTER 2 IN
PC CONTROL
MONITOR OUT
AUDIO OUT
S-VIDEO IN VIDEO IN
AUDIO IN
Cb/Pb
L/MONO R
Y
Cr/Pr
AC IN
AUDIO OUT
PHONE
MONITOR OUT
2. Installation and Connections
Connecting an External Monitor
You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog
image you're projecting.
NOTE:
The MONITOR OUT connector will output no sound when the projector is in standby mode.
The MONITOR OUT connector will output no signal when [Power-saving] is selected in [Standby Mode] from the menu.
When the projector is in the standby mode, the image may not be correctly displayed while the cooling fans are running immedi-
ately after turning on or off the power.
The AUDIO OUT jack cannot be used as a headphone jack.
Output sound level can be adjusted in accordance with the sound level.
When audio equipment is connected, the projector speaker is disabled.
Daisy chain connection is not possible.
VGA signal cable (supplied)
VGA signal cable (not supplied)
Audio cable (not supplied)
Audio cable (not supplied)