NEC MT1060 Projector User Manual


 
E-57
SPECIFICATIONS
This section provides technical information about the MT1065/MT1060 Projector's performance
Model Number MT1065/MT1060
Optical
LCD Panel MT1065: 1.0" p-Si TFT active-matrix with Micro Lens Array
MT1060: 1.0" p-Si TFT active-matrix
Resolution 1024ן768 pixels up to UXGA with Advanced AccuBlend
Lens Motorized zoom and focus:
F1.74 – 2.18 f=30.8mm – 41.6mm
Lamp 275 W DC standard / 160 W DC (Optional Extended life lamp)
Color Image Sensor 23,040 pixels (160 dotsן144 lines)
Image Size 25 inches – 500 inches (0.6 m – 12.7 m) diagonal
Projection Distance 2.96ft – 51.23 ft / 10.0 m (Tele) – 15.6 m (Wide)
Projection Angle Tele : 8.2° – 8.6° Wide : 9.8° – 10.5°
Electrical
Inputs 2 RGB (D-Sub 15 Pin/BNCן5), 1 DVI, 1 S-Video, 1 Video, 2 PC Card, 3 Stereo Mini Audio, 2 (L/R) RCA Audio,
1 PC Control, 1 (L/R) RCA Audio
Outputs 1 RGB, 1 Stereo Mini Audio
USB Port 1 A Type, 1 B Type
Video Compatibility NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, HDTV:1080p, 1080i, 720p, 576p, 576i, 480p, 480i
(w/optional cable)
Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over) / Vertical: 48 Hz to 120 Hz
Video Bandwidth RGB: 80 MHz (-3dB)
Color Reproduction 16.7 million colors simultaneously, Full color
Horizontal Resolution NTSC / NTSC4.43/PAL/PAL-M/PAL-N/PAL60: 550 TV lines
SECAM: 350 TV lines
YCbCr: 800 TV lines
RGB: 1024 dots (H)ן768 dots (V),
External Control RS232, IR, USB, LAN (optional)
Sync Compatibility Separate Sync / Composite Sync / Sync on G
Built-in Speakers 5Wן2 (stereo)
Power Requirement 100 - 120V AC / 200 - 240V AC, 50 / 60 Hz
Input Current 4.0A (100 - 120V AC) / 2.0A (200 - 240V AC)
Power Consumption 1.0W in Standby mode/390W in Lamp Normal mode/320W in Lamp Eco mode
(250W in use of the optional Extended Life lamp)
Mechanical
Installation Orientation: Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
Dimensions 13.2" (W)ן4.5" (H)ן12.7" (D)
334mm (W)ן115mm (H)ן323mm (D)
(not including protrusions)
Net Weight 13.0 lbs / 5.9 kg
Environmental Considerations
Operational Temperatures
:32° to 95°F (0° to 35°C), 20% to 80% humidity (non-condensing)
Storage Temperatures : 14° to 122°F (-10° to 50°C), 20% to 80% humidity (non-condensing)
Regulations UL Approved (UL 1950, CSA 950)
Meets DOC Canada Class B requirements
Meets FCC Class B requirements
Meets AS/NZS3548 Class B
Meets EMC Directive (EN55022:1998, EN55024-1998, EN61000-3-2, EN61000-3-3)
Meets Low Voltage Directive (EN60950, TUV GS Approved)
For additional information visit:
US : http://www.necvisualsystems.com
Europe : http://www.nec-europe.com/
Global : http://www.nec-pj.com/
LCD panels are inherently susceptible to pixel defects.
For additional information regarding pixel data, please contact your local NEC sales office.
The specifications are subject to change without notice.