NEC LCD1550M Computer Monitor User Manual


 
13
Specifications
Monitor MultiSync
®
LCD1550M
Notes
Specifications Monitor
LCD Module Diagonal: 15.0 inch Active matrix; thin film transistor (TFT)
Viewable Image Size: 15.0 inch liquid crystal display (LCD); 0.30 mm dot
Native Resolution (Pixel Count): 1024 x 768 pitch; 300cd/m
2
white luminence; 450:1
contrast ratio, typical
Input Signal Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Display Colors Analog input: 16,777,216 Depends on display card used.
Synchronization Horizontal: 31.5 kHz to 60 kHz Automatically
Range Vertical: 56.2 Hz to 75.1 Hz Automatically
Resolutions Supported 720 x 400*
1
: VGA text
Some systems may not support
640 x 480*
1
at 60 Hz to 75 Hz
all modes listed.
800 x 600*
1
at 56 Hz to 75 Hz
832 x 624*
1
at 75 Hz
1024 x 768 at 60 Hz to 75 Hz ..................
NEC-Mitsubishi Electronics Display cites
recommended resolution at 75 Hz for
optimal display performance.
Active Display Area Horizontal :
304 mm/12.0 inches
Vertical :
228 mm/9.0 inches
USB Hub
I/F: USB Specification Revision 1.1
Port: Upstream 1
Downstream 4
Load Current: Maximum 0.5A per port
Speakers
Practical Audio Output: 1.0W + 1.0W
Power Supply
AC 100 -
120 V/ 220-240 V
@ 50/60 Hz
Current Rating 0.75 A @ 100
120 V, 0.45 A @ 220-240 V
Dimensions
345 mm (W) x 363 mm (H) x 162 mm (D)
13.6 inches (W) x 14.3 inches (H) x 6.4 inches (D)
Weight 4.9 kg
10.8 lbs
Environmental Considerations
Operating Temperature: 5°C to 35°C/41°F to 95°F
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
Storage Temperature: -10°C to 60°C/14°F to 140°F
Humidity: 10% to 85%
Feet: 0 to 31,500 Feet
*
1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.