6
Quick Start –continued
Figure R.3
Figure R.1
Tilt and swivel
Grasp both sides of the monitor screen with
your hands and adjust the tilt and swivel as
desired (Figure TS.1).
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting
purposes:
1.Remove the connector cover and the
cable cover (Figure R.1).
2.Disconnect all cables.
3.Place monitor face down on a
non-abrasive surface (Figure
R.2).
4.Remove the 4 screws
connecting the monitor to the
stand and lift off the stand
assembly (Figure R.2).
The monitor is now ready for
mounting in an alternate
manner.
5.Connect the AC cord, signal cable and Audio cable to the back of the
monitor (Figure R.3).
6. Reverse this process to reattach stand.
NOTE: Use only VESA-compatible alternative mounting method.
When the monitor stand is removed, the USB capabilities will be disabled.
Figure TS.1
Figure R.2
Non-abrasive
surface