Filter
Top Products
5. Using On-Screen Display
82
Remote Sensor
Set the operating range for the wireless remote control.
Select from the following:
Front/Back
Front
Back
LAN Settings
See LAN Settings on page 84.
Standby Mode
There are two standby modes available: Normal and Power-Saving. Power-Saving
mode allows you to put the projector in the standby condition to consume less power
than Normal.
Note:
Be sure to connect the projector and computer while the projector is in standby
mode and before turning on the computer.
Select from the following:
Normal
Power-saving
Note:
The HTTP server functions are not available during Power-saving mode.
The MONITOR OUT function is not available during Power-saving mode.
Control through the PC Control connector and LAN mode is not available during
Power-saving mode. For PC control and LAN mode of the projector it is recom-
mended to leave the projector in the Normal mode.
Normal mode: Power indicator: Orange light
Status indicator: Green light
Power-saving mode: Power indicator: Orange light
Status indicator: Off