NEC NP-P420X Projector User Manual


  Open as PDF
of 222
 
28
3. Convenient Features
Changing Eco Mode/Checking Energy-Saving Effect Using Eco
Mode [ECO MODE]
TheECOMODE(ECO1andECO2)increaseslamplife,whileloweringpowerconsumptionandcuttingdownonCO
2
emissions.
Fourbrightnessmodesofthelampcanbeselected:[OFF],[AUTOECO],[ECO1]and[ECO2]modes.
[ECOMODE] Description StatusofLAMPindicator
[OFF] Thisisthedefaultsetting(100%Brightness). Off
[AUTOECO] Lamppowerconsumptionwillbechangedbetween
[OFF]and[ECO1]automaticallyaccordingtopicture
level
NOTE:Abrightgradationmaybelessvisibledepending
ontheimage.
SteadyGreen
light
[ECO1]
Lowlamppowerconsumption(approx.75%Bright-
ness).
[ECO2](P350X
only)
Lowerlamppowerconsumptionthan[ECO1]mode
(approx.60%Brightness)
Toturnonthe[ECOMODE],dothefollowing:
1. PresstheECOButtonontheremotecontroltodisplay[ECOMODE]screen.
2. PresstheECObuttonagaintoselectamodeyouwish.
• EachtimetheECObuttonispressed,thechoiceswillbechanged:
OFF → AUTO ECO → ECO1 (→ ECO2) → OFF
• WhentheprojectorisinECOmode,theLAMPindicatorwilllightgreen.
TIP:
• TheleafsymbolatthebottomofthemenushowsthecurrentselectionofECOmode.
2. Pressthe button.
The area of the magnified image will be moved
3. PresstheD-ZOOM(−)button.
Each time the D-ZOOM (−) button is pressed, the image is reduced.
NOTE:
• Theimagewillbeenlargedorreducedatthecenterofthescreen.
• Displayingthemenuwillcancelthecurrentmagnication.
 previous next