Filter
Top Products
Appendix A spscmd
spscmd –failbackall
It executes failback targeting all paths that are unavailable
for use.
spscmd –getfbmode
It displays the failback method currently set.
Active: active failback
Standby: standby failback
spscmd –getlun [-v] [-s0 | -s1 | -s2]
It displays a path list.
It displays a detailed list if the -v option is specified.
The -s0, -s1, and -s2 options allow specification of the order
of path display.
-s0: For the logical unit that is dynamically distributing the
loads, the paths will be displayed in the order of their
number. For other logical units, the paths will be
displayed in the order of priority. If not specifically
set, this display order will be applied.
-s1: Paths will be displayed in the order of their number.
-s2: Paths will be displayed in the order of priority.
(This function is not for Windows Server 2003.)
spscmd –getmode
It displays status of the following settings:
/1/ Types of NEC Storage PathManager (Enterprise/Standard)
/2/ Failback method (Active/Standby)
/3/ MSCS liaison (Enable/Disable)
spscmd –getmscsmode
It displays status of settings for MSCS liaison
(Enable/Disable).
spscmd –getmscsmode
It displays the version of NEC Storage PathManager install.
(This function is only for Windows Server 2003.)
spscmd –getwatcher
3