Filter
Top Products
3-6 Configuring the System
Boot — Use this menu to set boot options, including restore on
ac/power loss, set boot sequence, and assign drive letters to removable
devices.
Exit
Exits the Setup Utility with various save or discard options.
Use the keys listed in the legend bar on the bottom of the Setup Menu to
make the selections or exit the current menu. The following table
describes the legend keys.
Setup Key Functions
Key Function
F1 Provides help for the parameter field
being displayed.
Esc Exits the menu.
Up or down arrow keys Moves cursor up and down for item
selection.
Left or right arrow keys Selects next menu.
-/+ keys Changes values.
Enter Executes a command or selects
submenu.
F9 Loads the default configuration values
for the current menu.
F10 Saves the current values and exits
Setup.
To select one of the six menus from the menu bar, use the left and right
arrow keys. Use the up or down arrow keys to select an item under the
menu.
Menu items preceded by a
>
contain a submenu of selectable fields for
setting system parameters. Display a submenu by using the up or down
arrow keys to move the cursor to the desired submenu, then press
Enter
.
An Item Specific Help window on the right side of each menu displays
the help text for the currently selected Setup option. It updates as the
cursor moves to each new field.