NEC Versa S900 Disassembly Manual
Page 10
Fig. 13 Removing the touchpad
Note: Be careful when lifting out the touchpad. Notice that it is held in place by two latches marked in
Fig. 13
Removing the Hard Disk Drive
To remove the hard disk drive, first remove the Keyboard (see Removing the Keyboard Cover
and the Keyboard), remove the touchpad (see Removing the Touchpad), then perform the
following steps:
1. Remove the screws next to the hard disk drive as shown in Fig. 14 .
Fig. 14 Removing the hard disk drive screws
2. Take out of the system the hard disk drive holder that has come free after removing the
screws in Fig. 14 .
3. Slide the hard disk drive as shown in Fig. 15 and lift it out of the system.