Filter
Top Products
NEC Versa S900 Disassembly Manual
Page 9
2. Carefully flip over the touchpad assembly as shown (Fig. 10 ).
Fig. 10 Flipping over the touchpad assembly
Note: Be very careful flipping over the touchpad assembly as it is at this point still connected via a cable
to the system. The cable may be damaged by carelessly removing the assembly from its position.
3. Disconnect the cable connecting the touchpad to the main board (Fig. 11 ).
Fig. 11 Disconnecting the touchpad cable
4. Remove the screws marked in Fig. 12
Fig. 12 Removing the touchpad screws
5. Lift the topuchpad to remove it from its place as shown in Fig. 13 and put it aside.