Filter
Top Products
46
5. Using On-Screen Menu
¶ Menu Descriptions & Functions [Information]
Displays the status of the current signal and lamp usage. This item has three pages. The information included is as follows:
[Usage Time]
[Lamp Life Remaining] (%)
*1
[Lamp Hours Used] (H)
*2
[Filter Hours Used] (H)
*2
*1: The progress indicator shows the percentage of remaining bulb life.
The value informs you of the amount of lamp usage. When the remaining lamp time reaches 0, the Remaining
Lamp Time bar indicator changes from 0% to 100 Hours and starts counting down.
If the remaining lamp time reaches 0 hours, the projector will not turn on regardless of whether the lamp mode
is set to Normal or Eco.
*2: The message for lamp replacement and filter cleaning will be displayed under the following conditions:
• for one minute after the projector has been powered on.
• when the POWER ON/STAND BY button on the projector cabinet or the POWER OFF button on the remote
control is pressed.
To cancel the message, press any button on the projector cabinet or the remote control.
[Source]
[Source Index] [Horizontal Frequency]
[Vertical Frequency] [Signal Type]
[Video Type] [Sync Type]
[Sync Polarity] [Scan Type]
Lamp life(H)
Normal (min.) Eco (max.)
2000 3000
Replacement lamp
NP05LP