Filter
Top Products
10/100 Port Aggregator Tap
10
DIP Switch Settings
Switch Function Description
1 Turns Auto-negotiation ON
or OFF. Factory default
setting is Auto-negotiation.
If turned ON, ports A, B, and C/D automatically
negotiate the links. Positions 2 thru 8 are inac-
tive.
To manually congure ports A, B, and C/D, turn
switch to the OFF position. Positions 2 thru 8
are active.
2 Set Port A Duplex ON for Half-Duplex; turn OFF for Full-Duplex
3 Set Port A Speed ON for 10 Mbps; turn OFF for 100 Mbps
4 Set Port B Duplex ON for Half-Duplex; turn OFF for Full-Duplex
5 Set Port B Speed ON for 10 Mbps; turn OFF for 100 Mbps
6 Set Port 1 (and 2) Duplex ON for Half-Duplex; turn OFF for Full-Duplex
7 Set Port 1 (and 2) Speed ON for 10 Mbps; turn OFF for 100 Mbps
8 Active Response Turns Active Response ON or OFF
AUTO
NEGOTIATE
ON
OFF
NOTE: To activate, push buttons UP.
(This diagram shows all segments
in the OFF position)
ON
OFF
10
100
HD
FD
10
100
HD
FD
10
100
HD
FD
Active
Response
A CB
1 3 4 5 6 7 8 2
Figure 9: DIP Switch Settings