Filter
Top Products
10/100 Port Aggregator Tap
5
Figure 3: Rear Panel
LED Indicators
PWR 1/ PWR 2: Main and Redundant Power. If the Tap is deployed with
both power supplies, both LEDs will illuminate when the Tap is plugged in.
If an LED is off, this indicates that the corresponding power supply is not
functioning.
Additional Port Aggregator Tap LEDs are located in the upper left and right
hand corners of the RJ45 connectors for Port A, Port B, Port 1 and Port 2
(PAD-CU-AR only).
10/100 Indicator: If the Port is set to 10 Mbps, the LED illuminates or-
ange. If the Port is set to 100 Mbps, the LED illuminates green.
Link/Activity Indicators: If a good link is established, the LED illu-
minates a steady green. If there is current activity on this link, the LED
ashes.
•
•
•
Power DC JacksDIP Switch
1 3 4 5 6 7 82