Filter
Top Products
NetComm NB5PLUS4W QuickStart Guide for Mac
© NetComm Limited 2005 p 12
AIRPORT INSTALLATION
Step 1 – Install the Hardware
To connect your modem using Airport, follow these step-by-step instructions:
1. Install your Airport or Airport Extreme card.
If your Airport is not already installed, follow the instructions in the User Guide that came
with your Mac to install an Airport or Airport Extreme card.
2. Connect the ADSL cable.
Connect one end of the telephone cable provided to the port labelled ADSL on the rear
panel of your NB5PLUS4W Modem. Connect the other end to your wall phone jack.
3. Attach the power connector.
Connect the AC power adapter to the Power connector on the back of the NB5PLUS4W and
plug in the adapter into a wall outlet or power strip.
4. Switch on the power. Your NB5PLUS4W will start up. Turn on your Mac.
Step 2 – Set up your Mac
This is how to configure your Mac to work with your NB5PLUS4W ADSL Modem.
Please note that, while it may be possible to connect wirelessly to the NB5PLUS4W using Mac OS
9.x, only Mac OS X is supported.
1. From the Apple menu, select System Preferences.