Filter
Top Products
NetComm NB5PLUS4W QuickStart Guide for Mac
© NetComm Limited 2005 p 16
13. If your Mac does not accept an IP address from the DHCP server in your NB5PLUS4W and
the IP address field remains blank, try selecting “Using DHCP with manual address” from
the “Configure iPV4” pop-up menu and entering 192.168.1.3 in the “IP address” field.
14. Click on the “Show” pop-up menu and select “Network Status”. Check to see that the bullet
alongside “Airport” is green.
15. Close the Network window by clicking the red close button (System 10.3 and 10.4) or select
“Quit System Preferences” under the “System Preferences” menu (System 10.2).