Filter
Top Products
NP643 IEEE 802.11g PC Card Adapter 11
YML786 Rev1
HARDWARE INSTALLATION
Installation Check
The LEDs of the Wireless PC Card Adapter are clearly visible and the status of the
network link can be seen instantly:
1. Once the device is plugged in to the PC Card slot, the Power LED will light up indi-
cating a normal status.
2. Once the driver is installed, the ACTIVE and POWER LED’s will start flashing. This
means the adapter is starting to scan for other wireless devices within its range.
3. While the Wireless PC Card Adapter is connected and transmitting data to an Access
Point or to another Wireless LAN station, the Active LED will start blinking.