NETGEAR 202-11171-04 Network Router User Manual


 
Table 1. Power On/Off LED
Icon LED Activity Description
Solid green Power is supplied to the router.
Solid red POST (power-on self-test) failure or a device malfunction occurred.
Blinking red LED blinks momentarily when the Reset button on the back of the unit is
pressed for 6 seconds.
The Power LED then blinks red three times when
the Reset button is released and then turns green as the gateway resets to
the factory defaults.
Off Power is not supplied to the router.
Table 2. DSL LED
Icon LED Activity Description
Solid green You have an ADSL connection. In technical terms, the ADSL port is
synchronized with an ISP network-access device.
Blinking green Indicates that the WiFi DSL modem router is negotiating the best possible
speed on the
ADSL line.
Off The unit is off or has no ADSL connection.
Table 3. Internet LED
Icon LED Activity Description
Solid green You have an Internet connection. If this connection is dropped due to an
idle time-out but the connection is still present, the LED stays green. If the
Internet connection is dropped for any other reason, the LED turns off.
Solid red The Internet (IP) connection failed. For troubleshooting information, see
Cannot Access the Internet on page 146.
Blinking green Data is being transmitted over the Internet connection.
Off No Internet connection is detected or the device is in bridge mode (an
external device handles the ISP connection).
Hardware Setup
15
D6200 WiFi DSL Modem Router