Filter
Top Products
Model FA510 Network Card Installation Guide
Instructions in this guide are for users of Windows
®
who are installing the
Model FA510 Network Card. For instructions on installing and verifying the
Windows network driver, refer to “Install the Windows Network Driver” on the
other side of this guide.
These four easy steps provide information for installing your Model FA510
Network Card:
1. Verify Package Contents
2. Install the Network Card
3. Connect the Network Cables
4. Install the Network Driver
As a last step, be sure to fill out and send in your warranty card.
To register online, direct your Web browser to the Web page at:
http://www.gearguy.com/pub/registration
Unpack the contents of the package and make sure that you have everything.
Verify PC Requirements
The instructions given in this guide are for using the NETGEAR
™
Model
FA510 Network Card in a PC that has a Microsoft
®
Windows operating system.
Start Here
Verify Package Contents
Model FA510
Network Card
Category 5 10/100 Mbps
UTP cable (provided with
Model FA510C Network
Card)
Installation
guide, Warranty &
Owner Registration Card,
and Support Information Card
Drivers and
Diagnostics Disk
RJ-45 adapter cable
9034FA