Filter
Top Products
Introduction and Hardware Description
9
ProSAFE 26-Port Fast Ethernet Smart Switch FS526Tv2
LEDs
The following table describes the LEDs.
Product Label
The product label on the back panel of the switch shows the hardware model number and
version, the software version, the unique MAC address, and the unique serial number. The
following figure shows a generic product label.
Figure 5. Generic product label
Table 1. LED descriptions
Port LED Designation
(Not applicable, system
LED)
Power • Off. Power is disconnected.
• Solid green. Power is supplied to the switch and the
switch is operating normally.
Twenty-four 10/100BASE-T
ports (one LED for each
port)
Link/ACT • Off. No link is established on the port.
• Solid green. A valid link (at any speed) is established on
the port.
• Blinking green. Packet transmission or reception occurs
on the port.
Two Gigabits Ethernet ports
(one LED for each port)
Link/ACT • Off. No link is established on the port.
• Solid green. A valid link is established on the port.
• Blinking green. Packet transmission or reception occurs
on the port.